Strong Compressive Adhesion Colorful Waterproof K11 Coating for Swimming Pool Kitchen Bathroom

• Formula: K11
• Color: Blue/Green
• Appearance: Liquid
• Main Raw Material: Acrylic
• Method: Roller
• Level: Primer
• Model NO.: KC-01003
• Drying Method: Air Drying
• Certification: ISO9001
• Substrate: Ceramic
• Kind: Two Components
• Series: Universal/Flexible
• Application Surface: Concrete / Wood / Metal
• Application Scope: Bathroom/Kitchen/Wall/Swimming Pool
• Application Area: Tunnel Roof Pool
• Customzied Color: Yes
• Construction Method: Brush Roll
• Dosage: 1.8-2kg Per Square Meter
• Applied: Can Be Applied to Wet Base Surface
• Features: Waterproofing Against Water Surface and Negative
• Feature: Prevent Leakage/ Water Stop / Waterproofing
• Feature3: Good Air Permeability/ Non-Toxic/ Eco Friendly
• Transport Package: Barrel
• Specification: 20KG
• Trademark: BZJ/OEM
• Origin: China
• Production Capacity: 50000kg

Product Description

Product Description

  Color K11 Waterproof Coating is an emulsion blend composed of a unique and very active polymer powder, synthetic rubber, synthetic styrene ester, etc., added with base material and appropriate amount of additives and fillers, and is refined after plasticizing It is a high-quality product made of high-quality materials and domestic high-quality auxiliary materials, and is produced in accordance with the highest level of national industry standards.

  K11 waterproof slurry is a two-component acrylic polymer modified cement based waterproof material. Because of its permeability and flexibility to the substrate, so as to prevent the penetration of water, at the same time, the film has good adhesion to concrete and mortar, and can form a tight and firm combination with it, so excellent waterproof performance. The product is non-toxic and environmentally friendly, can inhibit the growth of mold and prevent salt pollution, the construction is simple and not restricted by conditions, can be wet operation, economic and practical.

Product Name	Color K11 waterproof coating	Color	Blue/Green
Ratio	1:2	Kind	Two-component
Series	Flexible/Universal	Package	20Kg/Barrel

Product Features

1.Has a certain flexibility, can be used in the possibility of slight vibration and due to a variety of reasons for the micro-crack waterproof.
2.Can be applied on wet base surface.
3.It can be used for waterproofing against water surface and negative water surface, with the same excellent effect.
4.Products can penetrate into the base material pores, plug pores, prevent leakage.
5.Strong adhesion, can firmly adhere to the substrate surface, to avoid drum or external forces can still be firmly bonded.
6.Good air permeability, is non-toxic, harmless environmental protection products.

Construction method

CONSTRUCTION PREPARATIONS
1. Carefully check the base layer of the waterproof layer, deal with defects carefully, and clean them up.
(1) The base layer should be flat, smooth, free of sand and skin, and have a certain strength. Thedrainage slope should meet the design reguirements, The inner and outer corners should be made into rounded or sloped corners with a diameter of not less than 30mm.
(2) lf the base surface is dry, the base surface must be pre-wetted in advance to keep the base surface moist, but no clear water should be present.
(3) Defects in the base layer should be dealt with before construction can continue.
a. When unevenness, pits or water accumulation occur, various brands of synthetic latex cementmortar can be used to fill the surface and make slopes.2Skin peeling on the surface should be removed.
b. When repairing the old waterproof layer, the adhesion on the base layer should be removed and leveled. lf the surface of the old waterproof layer is smooth, the material has not failed, and it is compatible with K11 waterproof slurry, construction can be continued directly on it.

CONSTRUCTION TECNOLOGY
Paint Mixing:
1. The weighing of ingredients must be accurate, and the error of each weighing shall not exceed t5%.Ratio:
Universal K11 waterproof slurry ratio: liquid material: powder material = 2.4kg: 6.6kgFlexible K11 waterproof slurry ratio: liquid material: powder material = 3kg: 6kg;
2. Pour the additives into the container first in proportion and in order, then pour the powder into the container, and use an electric mixing drill to stir at the same time until it becomes a paste without precipitation. Criteria for judging whether it is uniform: the slurry is uniform without raw dough.
3. After mixing well, leave it for 5-10 minutes and stir again before use;
4. intermittent stirring should be maintained during the operation to prevent precipitation.

Base laver Processing:
After the base layer passes the inspection, the floating ash, gray sand and gravelumps on the surface should be cleaned,and then moistened before proceeding to the next construction process.

Enhancement laver and node processing:
The reinforcement layer mainly targets the weak links of the construction site, that is, the sites thatare prone to leakage. Enhanced treatment is adopted to improve waterproof safety performance and ensure waterproof effect.
a. In the parts that need to be strengthened, such as inner corners and pipe openings, they shouldbe made into small arcs with cement mortar, then apply the flexible K11 waterproof slurry once, and then apply the non-woven fabric a second time.
b. For the parts where the carcass reinforcement material needs to be laid, after the reinforcementcoating is dry, lay the cut carcass material flat, and then paste it with K11 waterproof slurry.

Painting construction:
1. When the thickness of the coating layer is within 1.5 mm, it should be applied in two passes; when it is between 1.5 and 2.0 mm, it should be applied in three passes. After applying the first coat, wait for the initial drying (an interval of 2 to 4 hours) before applying the second coat.
2. Painting should start from the lowest point on the plane farthest from the upper feeding port, firson the elevation and then on the plane.
3. When applying scraping on a flat surface, pour the mixed paint evenly on the base surface according to the amount, and scrape it evenly with a brush. The front and back scrapings on the flat surface: should be perpendicular to each other. When painting the facade, the brush should be applied frombottom to top.
4. When the first coat of coating is dry and solid and can be used for the second coat of constructionthe quality of the coating should be carefully checked one by one to check for missing coatings andblisters.
5. After initial drying, spray water should be used for maintenance6. No construction is allowed on rainy, snowy and windy days. On foggy days, construction must bedone after the dew has dried.

Company Profile

Jiangxi Zhengjie New Materials Co., Ltd. is an enterprise that focuses on the research and development, manufacturing, and sales of high-tech waterproof products. We are committed to providing customers with excellent waterproofing solutions, integrating innovation, quality, and service.
Core advantages:
  Comprehensive R&D strength: We have a passionate and experienced R&D team, constantly pursuing innovation in waterproofing technology. By continuously innovating our research and development work, we ensure that our products always remain at the forefront of the industry.
  Advanced production equipment: The company covers an area of 10000 square meters and has a comprehensive set of advanced production equipment. The entire process from raw material processing to final product production goes through strict quality control. This helps ensure that our products meet the highest standards.
  Strict certification system: In order to provide customers with more reliable products, we have passed ISO9001 certification, quality management system certification, and environmental management system certification, which is our firm commitment to quality and environmental protection.
  High quality, low price, and excellent service: We have always adhered to the business philosophy of "high quality, low price, and excellent service", striving to provide customers with competitive products and high-quality pre-sales and after-sales services.
Collaboration philosophy:
  We work hand in hand with our customers to expand the market together. Through close cooperation with customers, we strive to meet the waterproofing needs of different industries and projects, providing reliable technical support and comprehensive solutions for customers.
  Jiangxi Zhengjie New Materials Co., Ltd. looks forward to working with you to create a better future and contribute our strength to the development of waterproofing field!
  Thank you for your interest in our company.

FAQ

1. Q: Are You Factory Or Trading Company?
     A: we are Manufacturer

2. Q: Can You Make Our Design Or Put Our Logo On The Product?
    A: Yes,We support OEM&ODM. We can put your Logo on product.

3. Q: About Sample?
     A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.

4.Q: About Delivery Time?
   A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.

5. Q:Do You Have Discount For Bulk Order?
    A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get

6. Q: Do you provide Technical & Engineering Service?
    A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.